Skateboard parts: names and functions of each component

A skateboard is a set of parts that are bought and replaced separately. Knowing the names helps you read product descriptions and understand what needs replacing. Here is the complete list, from top to bottom.

Board (deck)

This is the wooden board. In Portuguese, it is called a tábua, and the English term deck is also used. In Brazil, it is called a shape.

  • Material. Seven thin layers of maple, glued and pressed in a mould.
  • Nose. The front end. It is slightly longer and more angled.
  • Tail. The back end. This is where you pop the board to jump.
  • Concave. The side-to-side curve. It provides foot support.
  • Wheelbase. The distance between the holes of the two trucks.

Boards are in decks.

Griptape (griptape)

This is the rough sheet glued on top of the board. It keeps your shoes from slipping. It is sold in 9 by 33-inch sheets, which are cut to size. They are in griptape.

Trucks

These are the two metal axles. They hold the wheels and allow you to turn. Each truck has several parts:

  • Base (baseplate). The plate screwed to the board.
  • Hanger. The T-shaped part where you grind.
  • Axle (axle). The rod that goes through the hanger and where the wheels fit.
  • Kingpin. The central bolt that joins the base to the hanger.
  • Bushings (bushings). The two rubber cylinders on the kingpin. They determine how much the board turns.
  • Pivot cup. The plastic cup where the end of the hanger fits.

They are in trucks.

Wheels (wheels)

There are four, made of polyurethane. Two measurements define a wheel:

  • Diameter. In millimetres. Between 50 and 60 on a standard skateboard.
  • Hardness. On the A scale. The higher the number, the harder the wheel.

They are in wheels.

Bearings (bearings)

There are eight, two per wheel. They are metal rings with balls inside that allow the wheel to spin on the axle. All skateboard bearings are the same size, called 608.

  • Spacers (spacers). Small metal tubes that sit between the two bearings of each wheel.
  • Speed rings (speed rings). They sit on each side of the wheel, on the axle.

Hardware (hardware)

There are eight bolts and eight nuts. They attach the trucks to the board. The most common length is 7/8 of an inch. They are, along with the bearings, in hardware and bearings.

Risers

These are plastic or rubber plates placed between the truck and the board. They raise the skateboard so the wheels do not touch the wood when turning. They are optional and are mainly used with large wheels.

Summary

  • 1 board.
  • 1 sheet of griptape.
  • 2 trucks.
  • 4 wheels.
  • 8 bearings.
  • 8 bolts with nuts.

A complete skateboard comes with all of this already assembled. Those choosing their first can find the recommended measurements in the article on how to choose your first skateboard. All the equipment is in the skateboard collection.