Our brands
See allGuide
About Sandpaper
Grip tape is the part of the skateboard you think about least, but it has a major impact on how you ride. It keeps your feet on the board when you ollie, flip, or stop mid-descent. Worn, peeling, or slippery grip tape can make you lose confidence, while new, properly applied grip tape can make your skateboard feel like a completely different board. The Collective Store’s grip tape collection features sheets from leading skate brands in classic black and with graphics, priced between €7 and €12. We’re a skate shop in Trofa with a physical store that has been open since 2008, and in this guide, we’ll show you how to choose, apply, and care for your grip tape.
What you’ll find in this collection
The selection is short and to the point, featuring only leading brands:
- Grizzly Black Griptape: black grip tape featuring the Grizzly bear, one of the most popular grip tape brands in street skating.
- Pepper G5 Black Griptape: black grip tape from Pepper, a brand dedicated to grip tape, in the G5 version.
- Jessup Old School Griptape: grip tape from Jessup, one of the most iconic names in skate grip tape, in the Old School version.
- Mob Grip 9 Inches Black Griptape: a 9-inch-wide black sheet from Mob Grip, another brand widely used by skaters worldwide.
- Polar Horizontal Script Logo Griptape and Polar Vertical Script Logo Griptape: grip tape featuring Polar Skate Co.’s script logo, horizontally or vertically, for anyone looking to add a graphic touch to their board.
If you’ve already chosen your board, add the grip tape to your order. If you haven’t, check out the store’s decks.
Brands in the collection
Grizzly
A grip tape brand easily recognised by its bear logo. It’s a popular choice among street skaters looking for consistent grip tape with good grip.
Pepper
A brand specialising in grip tape. The G5 is the black version available here.
Jessup
A historic name in skate grip tape. Jessup Old School is the traditional grip tape that many skaters have used for years without any hassle.
Mob Grip
One of the best-known grip tape brands in skating. The 9-inch sheet fits most street decks.
Polar Skate Co
A Swedish skate brand with a distinctive visual identity. The script logo grip tape allows you to customise your board discreetly. See more from the brand at Polar Skate Co.
How to choose the right grip tape
Sheet width
Most grip tape comes in sheets about 9 inches wide, which covers most common street decks. If your deck is very wide, check the grip tape’s width on the product page. A slightly wider piece of grip tape than your board isn’t a problem: the excess is trimmed during application.
Grit and texture
Coarser-grit grip tape provides more grip and a greater sense of control, but it wears out your shoes faster and can scratch your hands when you pick up your board. Finer-grit grip tape is gentler on your shoes and hands, but offers slightly less grip. For street skating and skateparks, most skaters prefer a middle ground. If you do a lot of flips, consistent grip across the entire sheet is more important than very aggressive grit.
Air vents
Many modern sheets of grip tape have small holes or channels in the adhesive to let air escape during application. This reduces bubbles and makes the job easier, especially if it’s your first time applying grip tape to a skateboard.
Black or with graphics
Classic black grip tape is the easiest to keep looking good and matches any deck. Logo or graphic grip tape, such as Polar’s, adds personality, but shows dirt more easily over time. It’s a matter of personal taste.
How to apply grip tape, step by step
- Prepare the deck: the surface must be clean, dry, and dust-free. If the deck has had grip tape before, remove all adhesive residue.
- Position the sheet: remove the adhesive backing and hold the grip tape by its ends. Centre it over the board before letting it touch.
- Glue it on from the centre outwards: place the grip tape in the centre and smooth it with the palms of your hands towards the edges, the nose, and the tail, pushing the air out.
- Mark the outline: run a screwdriver or another metal tool firmly along the entire edge of the deck. You’ll see a white line marking where to cut.
- Trim the excess: using an X-Acto knife or a sharp blade, cut along the marked line with the blade angled outwards. Take your time around the curves of the nose and tail.
- Sand the edges: use a piece of the leftover grip tape to smooth the cut edge so it doesn’t peel during use.
- Drill holes for the screws: turn the deck over and, from underneath, drill through the grip tape at the eight screw holes using a thin drill bit or file. Then assemble the trucks.
To complete the assembly, check out the store’s trucks, wheels, and hardware and bearings. If you prefer a board ready to ride, we also have complete skateboards.
Grip tape care
- Clean off dirt: a toothbrush or nail brush and some dry brushing will remove most dirt and dust. For stubborn dirt, there are erasers specifically designed for grip tape.
- Avoid getting it wet: water causes the grip tape to peel and damages the deck’s wood. If your skateboard gets wet, let it air-dry away from heat sources.
- Check the edges: if the grip tape starts peeling at the nose or tail, re-glue it with a little contact adhesive before it gets worse.
- Replace it when it gets smooth: if your feet start slipping in your stance areas, it’s a sign that the grip tape has lost its grip. This often happens before the deck itself is worn.
Common mistakes when applying grip tape
The most common mistake is gluing the grip tape on from one end to the other in one go: air gets trapped in the middle and bubbles appear. Always start in the centre. Another mistake is cutting with a blunt blade, which tears the grip tape instead of cutting it and leaves an uneven edge; replace the blade whenever you feel resistance. It’s also best not to cut too close to the wood around the curves, as the grip tape will peel more quickly in those areas. If a bubble appears after application, prick it with the tip of the blade and smooth it out with your thumb.
Grip tape, shoes, and the rest of your setup
Grip tape and shoes work together. Very aggressive grip tape with thin suede shoes will wear out your footwear faster; gentler grip tape with shoes with thick rubber soles may feel slippery. If you’re building a setup from scratch, check out the entire skateboarding section. And to save money, check out the discounted skate gear, where discounted items are regularly added.
Shipping, exchanges, and our physical store
Shipping to mainland Portugal costs €5.90 and is free on orders over €59.90, so adding grip tape to a deck or a pair of trucks can help you reach that threshold. Delivery is made within 24 to 48 business hours by DPD or CTT, and paid orders placed by 12:00 are dispatched for delivery within the next 24 hours (business days). Madeira and the Azores: €12.90 (48 to 72 hours). Peninsular Spain: €8.90 (24 to 48 business hours). France: €12.90 (2 to 4 business days). Rest of Europe: €18.90 (3 to 7 business days). Prices are in euros and include VAT.
You have 30 days from delivery to exchange or return your item, provided it has not been used and still has its labels; for grip tape, this means the sheet cannot have been peeled off its backing. Return shipping costs are your responsibility, except in cases of defects or our error. In mainland Portugal, CTT schedules the collection, and refunds are issued using the same payment method. We accept MB WAY, Multibanco, PayPal, Visa, and Mastercard.
At our physical store on Rua Armindo Costa Azevedo Jr, Loja 20, 4785-099 Trofa, prices are the same as in the online store. If you have questions about grip tape or assembly, speak to us via WhatsApp or phone (+351 914 158 783) or email (info@collectivestore.pt), Monday to Friday, from 10:00 to 12:30 and from 14:00 to 17:30.
Frequently asked questions about grip tape
Does one sheet of grip tape cover an entire deck?
Yes. A standard sheet covers an entire street deck, from the nose to the tail. The leftover pieces can be used to smooth the edges.
How often should I replace my grip tape?
It depends on how much you ride. Many skaters replace their grip tape whenever they get a new deck; those who ride every day may need to replace it sooner, when their feet start slipping.
Can I put new grip tape over old grip tape?
That’s not a good idea. The new grip tape won’t stick properly, it will leave lumps, and your skateboard will become heavier. Remove the old grip tape with a hairdryer to soften the adhesive, then pull it off slowly.
Can I use this grip tape on a cruiser or longboard?
Yes, provided the board is not wider or longer than the sheet. For large boards, you may need two sheets. See also our cruisers and longboards.
Choose your grip tape, apply it carefully, and feel your skateboard firmly attached to your feet again. If you have any questions, visit the store or send us a message. Find more answers in our frequently asked questions.
1. What files does Collective Store sell?
2. How do I put the grip tape on the skateboard?
3. When should I replace the sandpaper?
4. Do the files have free shipping?




