Girl Philips Hardware - 7/8"
Girl Philips Hardware - 7/8"

Hardware and Bearings

Bearings, mounting hardware, tools, skate wax and oil, from Bones, Bronson, SKF, Ace and Bronze 56K, with a guide to ABEC ratings, lengths and cleaning.

24 products
24 products
  • Vendor:
    Girl Skateboards
    Girl Philips Hardware - 7/8"
    Regular price €7,00 EUR
    Sale price €7,00 EUR Regular price
  • Vendor:
    Girl Skateboards
    Girl Blue Abec 3 Bearings
    Regular price €35,00 EUR
    Sale price €35,00 EUR Regular price
  • Vendor:
    Girl Skateboards
    Girl Gold Abec 7 Bearings
    Regular price €35,00 EUR
    Sale price €35,00 EUR Regular price
  • Vendor:
    SKF Bearings
    SKF Tiago Lemos Signature Bearings Kit
    Regular price €45,00 EUR
    Sale price €45,00 EUR Regular price
  • SKF Bearings Lubrificant Oil
    Vendor:
    SKF Bearings
    SKF Bearing Lubricating Oil
    Regular price €13,00 EUR
    Sale price €13,00 EUR Regular price
  • Vendor:
    SKF Bearings
    SKF Louie Lopez Signature Bearings Kit
    Regular price €45,00 EUR
    Sale price €45,00 EUR Regular price
  • Vendor:
    SKF Bearings
    SKF Kader Sylla Signature Bearings Kit
    Regular price €45,00 EUR
    Sale price €45,00 EUR Regular price
  • Vendor:
    Chocolate Skateboards
    Chocolate Abec 5 Bearings
    Regular price €35,00 EUR
    Sale price €35,00 EUR Regular price
  • Bones Reds Big Balls Bearings
    Vendor:
    Bones Bearings
    Bones Reds Big Balls Bearings
    Regular price €39,00 EUR
    Sale price €39,00 EUR Regular price
  • Vendor:
    Shake Junt
    Shake Junt Bolts Allen Hardware - 1"
    Regular price €6,00 EUR
    Sale price €6,00 EUR Regular price
  • Bones Reds Super Redz Bearings
    Vendor:
    Bones Bearings
    Bones Reds Super Redz Bearings
    Regular price €39,00 EUR
    Sale price €39,00 EUR Regular price
  • Ace Trucks AF1 Hollow Hardware - 1"
    Vendor:
    Ace Trucks
    Ace Trucks AF1 Hollow Hardware - 1"
    Regular price €7,00 EUR
    Sale price €7,00 EUR Regular price
  • Ace Trucks AF1 Hollow Hardware - 1 1/4"
    Vendor:
    Ace Trucks
    Ace Trucks AF1 Hollow Hardware - 1 1/4"
    Regular price €7,00 EUR
    Sale price €7,00 EUR Regular price
  • Vendor:
    Ace Trucks
    Ace Trucks Hardware Allen - 1"
    Regular price €5,00 EUR
    Sale price €5,00 EUR Regular price
  • Andalé Bearings Lucas Puig Pro Bearings
    Vendor:
    Andalé Bearings
    Andalé Bearings Lucas Puig Pro Bearings
    Regular price €35,00 EUR
    Sale price €35,00 EUR Regular price
  • Bronson Speed Co Eric Dressen Pro G3 Bearings
    Vendor:
    Bronson Speed Co
    Bronson Speed Co Eric Dressen Pro G3 Bearings
    Regular price €39,00 EUR
    Sale price €39,00 EUR Regular price
  • Shake Junt Triple OG'S Bearings
    Vendor:
    Shake Junt
    Shake Junt Triple OG'S Bearings
    Regular price €29,00 EUR
    Sale price €29,00 EUR Regular price
  • Vendor:
    Carhartt WIP
    Carhartt WIP Skate Rub Brick Tool - Hamilton Brown / Wax
    Regular price €35,00 EUR
    Sale price €35,00 EUR Regular price
  • Independent Hardware (Philips) - 1"
    Vendor:
    Independent Trucks
    Independent Hardware (Philips) - 1"
    Regular price €5,00 EUR
    Sale price €5,00 EUR Regular price
  • Ace Trucks AF1 Skate Tool
    Vendor:
    Ace Trucks
    Ace Trucks AF1 Skate Tool
    Regular price €29,00 EUR
    Sale price €29,00 EUR Regular price
  • Vendor:
    SKF Bearings
    SKF Bearings Standard Kit
    Regular price €39,00 EUR
    Sale price €39,00 EUR Regular price
  • Bronson Speed Co. Samarria Brevard Pro G3
    Vendor:
    Bronson Speed Co
    Bronson Speed Co. Samarria Brevard Pro G3
    Regular price €39,00 EUR
    Sale price €39,00 EUR Regular price
  • Vendor:
    Bones Bearings
    Bones Reds Bearings
    Regular price €35,00 EUR
    Sale price €35,00 EUR Regular price
  • Bronson Speed Co. G2 Bearings
    Vendor:
    Bronson Speed Co
    Bronson Speed Co. G2 Bearings
    Regular price €29,00 EUR
    Sale price €29,00 EUR Regular price

Guide

About Hardware and Bearings

They are the smallest parts on a skateboard, but without them, nothing rolls or stays attached. In this Collective Store collection, we have brought together the bearings, assembly screws (hardware), tools, oil, and wax you need to build and maintain your board. Prices range from €5 to €45, making this the ideal collection to complete an order or bring a slow skateboard back to life. Below, we explain what ABEC means, which screw length to choose, and how to clean bearings at home.

What you will find in this collection

  • Bearings: sets of eight, for the four wheels, from brands such as Bones Bearings, Bronson Speed Co, SKF Bearings, Andalé Bearings, Ace, Shake Junt, Girl, and Chocolate.
  • Hardware: sets of eight screws with nuts to attach the trucks to the deck, in 7/8", 1", and 1 1/4", with Phillips (star) or Allen (hex) heads.
  • Tools: such as the Ace Trucks X Carhartt WIP AF1 Skate Tool, so you can tighten everything without carrying a wrench around.
  • Maintenance: SKF Bearings Lubricant Oil for bearings.
  • Wax: Limosine Paymaster Wax and Carhartt WIP Skate Rub Brick for edges and obstacles.

Brands in the collection

For bearings, Bones Bearings is represented by the Reds Big Balls and the Super Redz, two models many skaters know by name. Bronson Speed Co is represented by Eric Dressen and Franky Villani's pro G3 models. SKF Bearings, a well-known name in the world of industrial bearings, has signature kits from Tiago Lemos, Louie Lopez, and Kader Sylla. Andalé Bearings has Lucas Puig's pro model, Shake Junt has the Triple OG's, and Ace has the High Performance Bearings. Girl Skateboards and Chocolate Skateboards have entry-level bearings, great for getting started.

For hardware, you have Ace Trucks (AF1 Hollow and Allen), Bronze 56K (Jet Pack Allen), Shake Junt (Bolts Allen), and Girl (Phillips). Carhartt WIP joins in with wax and a tool made in partnership with Ace. See more from the brand in the Carhartt WIP collection.

Bearings: what you need to know

Standard size

Almost all skateboard bearings are 608 type: 8 mm inner diameter, 22 mm outer diameter, and 7 mm wide. That is why any bearing in this collection fits any skateboard wheel and any standard truck axle. You need eight, two per wheel.

ABEC is not a speed rating

Many bearings come with an ABEC rating (1, 3, 5, 7, 9), such as the Girl Blue Abec 3, Chocolate Abec 5, or Girl Gold Abec 7. The ABEC scale measures manufacturing tolerances, meaning the precision of the bearing's dimensions. It was designed for machines that run at very high speeds, and it does not directly indicate how fast a bearing is on a skateboard. On a skateboard, rotations are low and bearings take side impacts and hits, so other things matter more: the quality of the steel and balls, lubrication, shields, and impact resistance.

That is why several skate brands do not use the ABEC scale at all and prefer to say that the bearings are made and tested for skateboarding. In practice: an entry-level ABEC 7 bearing is not necessarily faster than a high-end bearing without a rating.

Shields, spacers, and speed rings

Most bearings have rubber or metal shields that prevent dirt from getting in. Rubber shields are usually removable, making cleaning easier. Some bearings use spacers between the two bearings on each wheel and speed rings between the bearing and the hanger or nut. If your kit comes with these parts, assemble them, because they help with alignment and reduce friction.

When to replace

If the bearings make a sandy noise, stop quickly when you spin the wheel by hand, or have visible play, start by cleaning them. If they still don't recover, or if they have been exposed to water and rusted, it is time to replace them.

Hardware: which screws to choose

Length

The length depends on what is between the truck and the deck:

  • 7/8": direct mounting, without risers. This is the most common length on street skateboards.
  • 1": with thin risers (about 1/8") or with some thicker baseplates.
  • 1 1/4": with taller risers (about 1/4"), used with large wheels to prevent wheel bite.

The screw should pass through the nut, but without leaving much sticking out. If the tip sticks out too much, it can scratch and catch on grinds. If it is too short, the nut will not catch enough thread and will come loose.

Phillips or Allen

Phillips screws are tightened with a star wrench and are the most common. Allen screws, with a hex head, sit closer to the grip tape and are harder to strip when tightened firmly. Both work: choose whichever is more practical with the tool you have. Hollow versions, such as the Ace AF1 Hollow, are hollow inside and lighter.

Colored screw

Many sets come with one or two screws in a different color. Mount them on the nose side, and you will know which end is the front of the deck without having to look at the graphic.

Skate tool

A skate tool (T tool) has the sockets you need for almost everything: the 3/8" wrench for the mounting screw nuts, the 1/2" for the axle nuts, and the 9/16" for the kingpin nut, plus a tip for Phillips or Allen screws. It fits in your pocket or backpack and solves a loose nut in the middle of a session.

How to clean bearings at home

  • Remove the wheels and take out the bearings (you can use the truck axle as a lever).
  • Carefully remove the rubber shield with a needle or X-Acto knife, if it is removable.
  • Dip the bearings in a suitable solvent or isopropyl alcohol and shake to loosen the dirt.
  • Let them dry completely. Never use water.
  • Put two or three drops of bearing lubricant, such as SKF oil, and spin to spread it.
  • Put the shields back on and mount them on the wheels.

Do not overdo the oil: too much lubricant attracts dust and ends up seizing the bearing.

Wax for edges and obstacles

Wax reduces friction between the truck or deck and the obstacle, making slides and grinds smoother. Rub a thin layer on the edge of benches, ledges, or coping. Use common sense: too much wax can make a spot slippery for people walking, and in public spots, it is best not to wax everything.

Complete the setup

If you are building a new board, add to the screws and bearings a deck from the decks collection, a pair of trucks, a set of wheels, and a sheet of grip tape. You have everything together in the skate collection. If you prefer not to choose piece by piece, the complete skateboards already come with hardware and bearings mounted.

Shipping, exchanges, and physical store

Shipping to Continental Portugal costs €5.90 and is free from €59.90. Since the items in this collection are cheap, adding some bearings or a set of screws to a larger order is a good way to reach free shipping. Delivery takes 24 to 48 business hours via DPD or CTT, and paid orders placed by 12:00 are dispatched for delivery within the next 24 hours, on business days. For Madeira and the Azores, shipping costs €12.90 (48 to 72 hours), for Peninsular Spain €8.90 (24 to 48 business hours), for France €12.90 (2 to 4 business days), and for the rest of Europe €18.90 (3 to 7 business days). Prices in euros include VAT.

You have 30 days from delivery to exchange or return unused items in their original packaging. Return shipping costs are your responsibility, except in case of a defect or our error, and in Continental Portugal, the pickup is scheduled by CTT. The refund is made through the same payment method: MB WAY, Multibanco, PayPal, Visa, or Mastercard.

The physical store is located at Rua Armindo Costa Azevedo Jr, Loja 20, 4785-099 Trofa, with the same prices as the online store. Talk to us on WhatsApp or by phone at +351 914 158 783, or by email at info@collectivestore.pt, from Monday to Friday, from 10:00 to 12:30 and from 14:00 to 17:30.

Frequently asked questions

How many bearings do I need for a skateboard?

Eight, two for each wheel. The sets in this collection usually come with all eight, but check the product page.

Are ABEC 7 bearings faster than ABEC 3?

Not necessarily. The ABEC scale measures manufacturing tolerances, not speed on a skateboard. Material quality, lubrication, and cleanliness make more of a difference.

What screw length do I use without risers?

7/8" is the usual length. If you have risers, add their thickness and go with 1" or 1 1/4".

Can I use machine oil or WD-40 on bearings?

It is not ideal. Degreasers remove lubrication, and some oils attract dust. Use a bearing lubricant.

Do trucks come with screws?

Usually not, they are bought separately. For other questions, see the frequently asked questions.

Clean bearings, screws to size, and a good tool in your pocket: they are details, but they make your skateboard roll as it should.

Frequently asked questions about Hardware and Bearings
1. What size screws do I need for my skateboard?

For trucks mounted directly to the deck, 7/8" or 1" hardware comes with them. Use 1" with thin risers and 1 1/4" with taller risers. You have Allen and Phillips hardware from Ace, Independent, Bronze 56K and Shake Junt.

2. What does ABEC mean in bearings?

ABEC is an industrial precision rating, from 1 to 9. In skateboarding, a higher number does not mean more speed, because bearings have to withstand impacts. Brands like Bones and SKF use their own scales.

3. How do I clean and lubricate the bearings?

Remove the wheel bearings, remove the grease caps if they are removable, and wash them in a suitable solvent. Let them dry thoroughly and apply two drops of lubricant, such as SKF oil. Avoid water and cooking oils.

4. Do the bearings have free shipping?

Shipping to mainland Portugal is free on orders over €59.90. Below this, it costs €5.90. Adding bearings to wheels or a deck usually brings the order up to the free shipping threshold.